How to determine the version of the Xbox 360 firmware


Many gamers when buying Xbox 360 may not be suspected that a custom firmware is used on the console. After all, hacked consoles can give the joy to lovers of free games, and to upset the license adherents to an unexpected banner online.

Many gamers when buying Xbox 360 may not be suspected that a custom firmware is used on the console. After all, hacked consoles can give the joy to lovers of free games, and to upset the license adherents to an unexpected banner online.

Purchase place console

To begin with, it is worth thinking about exactly where the prefix was purchased. If it was a large electronic technology store or one of most well-known Internet markets - then 100% can be confident in the purity and originality of the acquired console.

However, if xbox was Purchased from hand Or through the site where they sell reflashing devices - most likely the gadget was hacking. But other methods will surely learn.

Attention! If the console holder is very important not to receive the ban, all the actions below are worth producing on the device without connecting to the Internet.

Year of issue

You can approximately find out the version of the original firmware on the Xbox 360 by the date of manufacture of the product itself. To do this, pay attention to on the factory sticker located on the back of the hull:

  • Xbox released until September 2011 Most likely stitched LT 1.9 or LT 2.0.
  • If the device is released late September 2011 Most likely the LT 3.0 firmware is installed.

This is due to the fact that new revisions of the console were equipped with drives that were not recommended, or it was impossible to flash on the version of Lt below 3.0.

How to find out whether the drive

To determine more accurately flash xbox 360 or not, you need to get or independently record a disk with any game distributed in the image taken from the XGD3 disk. When trying to start such a carrier on the console with the official firmware, a message will be received that " This disk with mixed content " On the pirate firmware, the disk is started or issued an error " The disk is not supported ".

How to define FREEBOOT firmware

The presence or absence of FreeBoot can be recognized by a variety of features:

  • If you try to enable the console by pressing the opening button, it will appear on the screen xell menu (Blue screen with white inscriptions). If it is missing, the device is either pure or stitched by another method.
  • Starting speed The console may also indicate the presence of hacking. If the device works with FreeBoot, it can be loaded for a very long time compared to the "clean" consoles and the whole process will be accompanied by outsiders outgoing from Xbox.
  • If the logo with the inscription appears during loading Freestyle Dash - Gadget has on board FreeBoot.
  • GOD Games It is freely launched from external media connected via USB to the console.

To find out the version of the Xbox 360 firmware by the last method, using the GOD game launch, you must carefully carefully explore the described In the network, manuals for the correct entry of the game on USB media, pre-checking its performance. This will exclude extra misunderstandings.

Check launching game

The image of the XGD3 game recorded on the blank causes the consoles with the drive stitched on LT below 3.0 error " The disk is not supported ". If the game still started - the firmware of the drive LT 2.0 or 1.9. You can very rarely meet the version below.

We define the firmware XKEY.

XKey is a drive emulator, and is designed to launch ISO images of games from external media. For this he is required Additional device which is placed inside the console housing. So, if behind or on any other side (rarely), there is clearly not provided from the USB port, it means that the device is currently working with XKEY.

Contact masters

If all of the above methods are too difficult, then to determine the firmware, it is recommended to avoid irreparable consequences to contact the service centers where the Xbox 360 firmware is engaged. If the console has been taken from hand and is able to contact the seller, ask him, maybe he remembers wherever carried out a breaking of the prefix.

Sometimes service centers are left on the Xbox case a sticker with their data and, often with the installation date and firmware version. However, this is not a guarantee, since it is impossible to be confident that the previous owner did not produce independent actions to update the hacking or that the prefix drive was not replaced.

Many gamers when buying Xbox 360 may not be suspected that a custom firmware is used on the console. After all, hacked consoles can give the joy to lovers of free games, and to upset the license adherents to an unexpected banner online.

Purchase place console

To begin with, it is worth thinking about exactly where the prefix was purchased. If it was a large electronic technology store or one of most well-known Internet markets - then 100% can be confident in the purity and originality of the acquired console.

However, if xbox was Purchased from hand Or through the site where they sell reflashing devices - most likely the gadget was hacking. But other methods will surely learn.

Attention! If the console holder is very important not to receive the ban, all the actions below are worth producing on the device without connecting to the Internet.

Year of issue

You can approximately find out the version of the original firmware on the Xbox 360 by the date of manufacture of the product itself. To do this, pay attention to on the factory sticker located on the back of the hull:

  • Xbox released until September 2011 Most likely stitched LT 1.9 or LT 2.0.
  • If the device is released late September 2011 Most likely the LT 3.0 firmware is installed.

This is due to the fact that new revisions of the console were equipped with drives that were not recommended, or it was impossible to flash on the version of Lt below 3.0.

How to find out whether the drive

To determine more accurately flash xbox 360 or not, you need to get or independently record a disk with any game distributed in the image taken from the XGD3 disk. When trying to start such a carrier on the console with the official firmware, a message will be received that " This disk with mixed content " On the pirate firmware, the disk is started or issued an error " The disk is not supported ".

How to define FREEBOOT firmware

The presence or absence of FreeBoot can be recognized by a variety of features:

  • If you try to enable the console by pressing the opening button, it will appear on the screen xell menu (Blue screen with white inscriptions). If it is missing, the device is either pure or stitched by another method.
  • Starting speed The console may also indicate the presence of hacking. If the device works with FreeBoot, it can be loaded for a very long time compared to the "clean" consoles and the whole process will be accompanied by outsiders outgoing from Xbox.
  • If the logo with the inscription appears during loading Freestyle Dash - Gadget has on board FreeBoot.
  • GOD Games It is freely launched from external media connected via USB to the console.

To find out the version of the Xbox 360 firmware by the last method, using the GOD game launch, you must carefully carefully explore the described In the network, manuals for the correct entry of the game on USB media, pre-checking its performance. This will exclude extra misunderstandings.

Check launching game

The image of the XGD3 game recorded on the blank causes the consoles with the drive stitched on LT below 3.0 error " The disk is not supported ". If the game still started - the firmware of the drive LT 2.0 or 1.9. You can very rarely meet the version below.

We define the firmware XKEY.

XKey is a drive emulator, and is designed to launch ISO images of games from external media. For this he is required Additional device which is placed inside the console housing. So, if behind or on any other side (rarely), there is clearly not provided from the USB port, it means that the device is currently working with XKEY.

Contact masters

If all of the above methods are too difficult, then to determine the firmware, it is recommended to avoid irreparable consequences to contact the service centers where the Xbox 360 firmware is engaged. If the console has been taken from hand and is able to contact the seller, ask him, maybe he remembers wherever carried out a breaking of the prefix.

Sometimes service centers are left on the Xbox case a sticker with their data and, often with the installation date and firmware version. However, this is not a guarantee, since it is impossible to be confident that the previous owner did not produce independent actions to update the hacking or that the prefix drive was not replaced.

Published the editor of the VP, 02/21/2018. Sent to Articles and News

To find the appropriate image of the game on the Internet or select the desired disc in the store, You need to know the version of the actuator firmware Xbox 360. Knowledge of versions of modifications will help you understand whether to update the firmware.

How to find out the Xbox 360 firmware version

To begin with, we note that the console bought in a large store of technology, will not have a firmware On board. There they are sold exclusively with factory settings .

Consoles acquired from hand or special sites can be improved, including Drive firmware . Usually on the page with the goods indicate all the characteristics.

In our workshops produced Xbox 360 firmware . You can safely trust many years of experience of our specialists. Call and write down!

By the date of manufacture xbox 360

By the date of production can be done Conclusion about the firmware version . This method does not allow one hundred percent warranty, but the result very often confirms testing.

If the prefix comes off the conveyor after January 2012 The drive is most likely stitched by the LT + 3.0 version, which came out at this time. Old LT + 2.0 began to update to a new third version, and on the consoles of Xbox 360 SLIM and E could only be put in LT + 3.0, so it meets most often.

If the console produced before the specified date It may be firmware LT + 1.9 or LT + 2.0. Earlier versions of the firmware are extremely rare.

Take a disk with the game

Find out which LT is installed on the Xbox 360, you can with Self-speaking disk with game . The image must have XGD3 format and recorded under LT + 3.0 firmware.

If after the disk was inserted into the DVD drive, an inscription appeared on the screen "Disc is not supported" It means that the image is collected under the version of LT + 2.0, and the drive will flash the LT + 3.0 version, or vice versa.

Carefully check that the game is recorded on which CD is recorded, as well as read the basic requirements for burning.

If the disk can not be read, then there is probability that Drive is faulty either The disc is recorded wrong .

Learn from Masters

Another way to learn xbox 360 drive firmware - Contact masters which it was installed on the console. If the previous owner remembers where he attracted the prefix to flash, then do not be lazy and find out the details of the specialists.

You can take a prefix and recorded wheels with you in the workshop. Experts will help Determine the firmware version And also indicate whether the image is recorded correctly.

If there is no way to contact the workshop, you can search the sticker, which is left after the firmware in the service center. It is on it that information may be present. About installation date as well as information About firmware version .

By purchasing a game console, especially if we are talking about buying "from the hands", it may be interested in the question of which firmware on it is installed. This information is necessary to select the desired image of the game you are going to download or buy in the store. Understand how to find out which firmware is installed on the XBOX console, this article will help.

Xbox 360 prefix

Firmware game consoles

Nowadays, the concept of "firmware of the device" is no longer new, and refers not only to the accrehensions. Sometimes such a term indicates the default devices (factory) settings. But more often we are talking about modified software to expand the functionality of the consoles in our case.

However, before making a decision on an independent flashing of your console, it is worth it to weigh all the "for" and "against".

Pros and cons of firmware

The main idea of ​​making changes in this nature into the game console is to access the launch of free games, unlicensed, downloaded from the network, etc. The possibility of launching licensed versions of toys will remain unchanged.

In the process of such an intervention, there are certain disadvantages that should be taken into account before hurrying to improve their console. The main disadvantages are that:

  1. To flash, it will be necessary to disassemble the console, while removing the factory seal, which, of course, cannot be installed back after the process is completed. Accordingly, the warranty on the device disappears permanently.
  2. You need to be prepared for the fact that the drive service life is reduced.
  3. You will need to acquire blanks.
  4. Non-obscure capabilities, so you still will remain paid content.
  5. If we are talking about changing the system support of the Xbox 360, then you can be blocked on the Xbox 360 - Live service. Now there are versions of software that can bypass this nuance, but you need to be warned about such a risk.

Factory and custom firmwareService Xbox Live

The official firmware is functionality, the software of the device that was laid by the manufacturer.

Unofficial (it is called custom) is to make changes in varying degrees into the official version of the firmware. Or this is a completely new software developed on the basis of or by type of factory, but with the removal of unnecessary programs, adding new and expansion of the functionality.

Determine which firmware is installed on xbox 360

Now smoothly approach the urgent question, the solution of which will help you play full force. How to find out what version of the firmware on your Xbox 360?

Fribut (FreeBoot)

The presence of Freibut can be understood by external indicators. Look at the screen after turning on the device. The screen can have a blue background with the displayed XELL inscription. Conclusion - the provision of "Freibut".

XELL screen screen

Take the GOD format game. The normal inclusion of the game is also a faithful sign of Freibut.

Example God games

Pay attention to the main menu and the presence of Freestyle Dash inscription, which also indicates the type of firmware type.

Freestyle Dash Provision

Drive unit

You can estimate the date of manufacture of the device (not the most accurate way to determine the version, but quite often gives the right facts).

If the console is made later than January 2012, then we can assume that the LT + 3.0 version. If the prefix is ​​released before, then probably the software will be LT +1.9 or LT +2.0.

Another way: using a unlicensed disk with a game. It should be downloaded and recorded under LT + 3.0. If your Xbox will not support the disk, then we conclude that the prefix is ​​stitched by another version. It is worth noting that for testing different versions it will be necessary to record games for each of them, respectively.

XKey.

If such software is installed on the gaming console, then a remote with various connectors is included with the Xbox. A characteristic feature is the presence of an electronic USB key.

If all the ways are exhausted, but it does not go out to find out the type of device firmware, then you should contact the console in service or to the local master.

360.

To find the appropriate image of the game on the Internet or select the desired disc in the store, You need to know the version of the actuator firmware Xbox 360.

How to find out the Xbox 360 firmware version

To begin with, we note that the console bought in a large store of technology, will not have a firmware Knowledge of versions of modifications will help you understand whether to update the firmware. On board. There they are sold exclusively .

Consoles acquired from hand or special sites can be improved, including Drive firmware . Usually on the page with the goods indicate all the characteristics.

In our workshops produced Xbox 360 firmware . You can safely trust many years of experience of our specialists. Call and write down!

By the date of manufacture xbox 360

with factory settings

with factory settings

By the date of production can be done Conclusion about the firmware version . This method does not allow one hundred percent warranty, but the result very often confirms testing.

If the prefix comes off the conveyor after January 2012 The drive is most likely stitched by the LT + 3.0 version, which came out at this time. Old LT + 2.0 began to update to a new third version, and on the consoles of Xbox 360 SLIM and E could only be put in LT + 3.0, so it meets most often.

If the console produced before the specified date It may be firmware LT + 1.9 or LT + 2.0. Earlier versions of the firmware are extremely rare.

Take a disk with the game

Find out which LT is installed on the Xbox 360, you can with Self-speaking disk with game . The image must have XGD3 format and recorded under LT + 3.0 firmware.

If after the disk was inserted into the DVD drive, an inscription appeared on the screen "Disc is not supported" It means that the image is collected under the version of LT + 2.0, and the drive will flash the LT + 3.0 version, or vice versa.

Carefully check that the game is recorded on which CD is recorded, as well as read the basic requirements for burning.

If the disk can not be read, then there is probability that Drive is faulty either The disc is recorded wrong .

Learn from Masters

Another way to learn xbox 360 drive firmware - Contact masters Sticker with the date of production of XBOX 360

which it was installed on the console. If the previous owner remembers where he attracted the prefix to flash, then do not be lazy and find out the details of the specialists. You can take a prefix and recorded wheels with you in the workshop. Experts will help And also indicate whether the image is recorded correctly.

If there is no way to contact the workshop, you can search the sticker, which is left after the firmware in the service center. It is on it that information may be present. About installation date as well as information About firmware version .

Many gamers when buying Xbox 360 may not be suspected that a custom firmware is used on the console. After all, hacked consoles can give the joy to lovers of free games, and to upset the license adherents to an unexpected banner online.

Purchase place console

To begin with, it is worth thinking about exactly where the prefix was purchased. If it was a large electronic technology store or one of most well-known Internet markets - then 100% can be confident in the purity and originality of the acquired console.

However, if xbox was Purchased from hand Or through the site where they sell reflashing devices - most likely the gadget was hacking. But other methods will surely learn.

Attention! If the console holder is very important not to receive the ban, all the actions below are worth producing on the device without connecting to the Internet.

Year of issue

You can approximately find out the version of the original firmware on the Xbox 360 by the date of manufacture of the product itself. To do this, pay attention to on the factory sticker located on the back of the hull:

  • Xbox released until September 2011 Most likely stitched LT 1.9 or LT 2.0.
  • If the device is released late September 2011 Most likely the LT 3.0 firmware is installed.

This is due to the fact that new revisions of the console were equipped with drives that were not recommended, or it was impossible to flash on the version of Lt below 3.0. Year of issue

How to find out whether the drive

To determine more accurately flash xbox 360 or not, you need to get or independently record a disk with any game distributed in the image taken from the XGD3 disk. When trying to start such a carrier on the console with the official firmware, a message will be received that " This disk with mixed content " On the pirate firmware, the disk is started or issued an error " The disk is not supported ".

How to define FREEBOOT firmware

The presence or absence of FreeBoot can be recognized by a variety of features:

  • If you try to enable the console by pressing the opening button, it will appear on the screen xell menu (Blue screen with white inscriptions). If it is missing, the device is either pure or stitched by another method.
  • Starting speed The console may also indicate the presence of hacking. If the device works with FreeBoot, it can be loaded for a very long time compared to the "clean" consoles and the whole process will be accompanied by outsiders outgoing from Xbox.
  • If the logo with the inscription appears during loading Freestyle Dash - Gadget has on board FreeBoot.
  • GOD Games It is freely launched from external media connected via USB to the console.

To find out the version of the Xbox 360 firmware by the last method, using the GOD game launch, you must carefully carefully explore the described In the network, manuals for the correct entry of the game on USB media, pre-checking its performance. This will exclude extra misunderstandings. How to determine the version of the Xbox 360 firmware

Check launching game

The image of the XGD3 game recorded on the blank causes the consoles with the drive stitched on LT below 3.0 error " The disk is not supported ". If the game still started - the firmware of the drive LT 2.0 or 1.9. You can very rarely meet the version below.

We define the firmware XKEY.

XKey is a drive emulator, and is designed to launch ISO images of games from external media. For this he is required Additional device which is placed inside the console housing. So, if behind or on any other side (rarely), there is clearly not provided from the USB port, it means that the device is currently working with XKEY. FireBoot Firmware

Contact masters

If all of the above methods are too difficult, then to determine the firmware, it is recommended to avoid irreparable consequences to contact the service centers where the Xbox 360 firmware is engaged. If the console has been taken from hand and is able to contact the seller, ask him, maybe he remembers wherever carried out a breaking of the prefix.

Sometimes service centers are left on the Xbox case a sticker with their data and, often with the installation date and firmware version. However, this is not a guarantee, since it is impossible to be confident that the previous owner did not produce independent actions to update the hacking or that the prefix drive was not replaced.

Determine the firmware version

As on the Xbox 360, find out what firmware is worth? Check out the information on the official website, pay attention to the date of manufacture, and the place of purchase Try the disk with the game or learn the signs of freeboot / xkey. An additional method is to contact the service center to the masters and get the information you are interested in. Below will look at the basic methods of checking and types of existing software.

How to find out the firmware version

There are more than five ways to check the firmware on the Xbox 360 and make sure that the device's purchase is safe. Despite this, many buyers make mistakes, and subsequently return the device or disappointed in the purchase. Below we give the main way to find out which software is on the equipment.

Before you start searching, learn whether your prefix is ​​staped in principle, and then you can already be determined with the versions.

Official information

The easiest way to find the firmware on the Xbox 360 is to do it on the product page. If the console is optimized and stitched, this information is necessarily reflected in the Internet site. In the absence of such, you can contact the seller by phone or online chat to clarify what exactly is on X Boxing.

Place acquisition

To determine the firmware on the Xbox 360, it is enough to recall the place of purchase of the console. If the device was purchased in the official store, you can be confident in its "cleanliness". This means that there is nothing on the device, because such devices go with factory settings. When buying a console with hands, it is better to know exactly because, because there may be anything. It is very important not to get ban, because in this case it will not work as to use the prefix.

Manufacture date

View version of the Xbox 360 firmware, which stands on the device, by the date of manufacture. To find out this parameter, look at the box with the device. If the console is made in 2012 and later, most likely, used versions for LT + 3.0 drive. Prior to that, the consoles with the LT + 2.0 or 1.9 version were produced. Older options are found in rare cases.

To find out the necessary information, pay attention to the model. For example, Xbox 360 E or SLIM. Only LT 3.0 installed on them. Other options do not apply here.

Check the game with the game

  1. Considering the ways to see the firmware on the Xbox 360, it is worth noting the decision of the practice - an attempt to launch any game. To check, do the following:
  2. Prepare a disk with the XGD 3 game, recorded under LT + 3.0.
  3. Insert it into the DVD drive.

Wait for the console reaction.

If an inscription appeared on the screen, that the disk is not supported, this indicates an application on the LT + 2.0 drive. Separate attention to the integrity of the media. There are situations where the error appears due to its damage, and the version of the software is not.

Make sure you do not freeboot

  1. Above, we looked at how to find out the Xbox 360 firmware version on the drive using a disk with the game. But in practice, most difficulties occur when using hacked consoles on Fribut. Understand that there is such software on the device, you can by the following factors:
  2. Turn on the console by pressing the drive cover. If Xell appears, it indicates FreeBoot. Otherwise, another firmware is installed on the device or it is not at all.
  3. Pay attention to the download speed. To understand what firmware on the Xbox 360, start the device. If it loads longer than usual, you can talk about the presence of fribut.
  4. Try to play. To find out what the Xbox 360 costs, run the game. If a Frestyle Dash appears during the process, this confirms that there is a fribut on the console.

Run the game in GOD format from an external medium. To find out the firmware version, try running a god game from an external media. If they are easily started from another media, it means that the device is free.

Decide the presence of XKey firmware

Xkey is an emulator of the drive designed to start ISO images from external media. To do this, you need a device that is inside the housing. If there are no factory USB ports on the console, it says about working with XKEY.

Contact masters

A popular way to find out which Xbox 360 factory firmware is to contact the specialists. They are in indirect or other signs can recognize the data you are interested in. In addition, the required information can be obtained from the masters, which were directly engaged in installing software. Alternative way - go to the official service center.

What firmware exist

  1. Before you know what the firmware on the Xbox 360 is, it is necessary to deal with their views. Today there are several options:
  2. FreeBoot - implies hacking the original system by installing a special chip on the Motherboard of the device. With the right execution of all steps, you can put and run games from flash drives and hard drives. In addition, Fribut allows you to run any games regardless of the production region. You can also download the content free of charge and not spend on the discs.
  3. LTU2 drive firmware. The most popular options for LT + 2.0 or 3.0. It implies a drive modification to remove the dependence on license games with the possibility of launching even pirate copies. It also appears to play on the network through X Box Live.

XKey - allow you to run ISO images from removable media, as well as play over the network.

Understanding how on Xbox 360, find out which firmware is worth, you can avoid many difficulties with equipment. And most importantly, you can independently decide which firmware is better for you. In the comments, share your experience and difficulties that you have encountered.

Firmware game consoles

Nowadays, the concept of "firmware of the device" is no longer new, and refers not only to the accrehensions. Sometimes such a term indicates the default devices (factory) settings. But more often we are talking about modified software to expand the functionality of the consoles in our case.

However, before making a decision on an independent flashing of your console, it is worth it to weigh all the "for" and "against".

Purchase place console

To begin with, it is worth thinking about exactly where the prefix was purchased. If it was a large electronic technology store or one of most well-known Internet markets - then 100% can be confident in the purity and originality of the acquired console.

However, if xbox was Purchased from hand Or through the site where they sell reflashing devices - most likely the gadget was hacking. But other methods will surely learn.

Attention! If the console holder is very important not to receive the ban, all the actions below are worth producing on the device without connecting to the Internet.

Many when purchasing Xbox 360 are calculated for the presence of a firmware that allows you to play a completely any game for free. However, how to find out about its presence?

Xbox 360 E Winchester. How to distinguish from the Corona firmware.

XKEY firmwareXbox 360 E Winchester began to put on the console with the date 2014.07 (written back over the barcode). The new motherboard is not yet stitched, it means that neither the free-acting firmware can not be made. Despite the release of the new motherboard, they still come across a leaving Corona fee. The only way 100% determine which motherboard is installed - remove the decorative side cover, which is located on the side closer to the DVD drive (it is better to start opening from the corner), and a light flashlight through the grille to see the presence of a metal cover on the processor.

Xbox 360 E.

Place the console with rubber legs to yourself and look through the grille.

Release dates 100% stitched consoles 2014.07.29
100% Corona. 2014.07.29
2014.07.30 2014.07.29
2014.07.31 2014.07.29
2014.08.08 2014.07.29

2014.07.29 2014.08.16 2014.07.29 2014.08.27 2014.07.29 2014.08.28 2014.07.29 2014.09.01 2014.07.29 2014.09.02 2014.07.29 2014.09.16 2014.07.29 2014.09.17 2014.07.29

2014.09.22.

Lyrical digression.

Year of issue

You can approximately find out the version of the original firmware on the Xbox 360 by the date of manufacture of the product itself. To do this, pay attention to on the factory sticker located on the back of the hull:

  • Xbox released until September 2011 Most likely stitched LT 1.9 or LT 2.0.
  • If the device is released late September 2011 Most likely the LT 3.0 firmware is installed.

This is due to the fact that new revisions of the console were equipped with drives that were not recommended, or it was impossible to flash on the version of Lt below 3.0. Year of issue

Hello everyone! I bought my Xbox 360 Slim from my hands, and found out that it was worth this wonderful freeboot thing! But since I am a fan of all new, I decided to play a week with a week I decided to format the memory card of my Xbox 360, without even suspecting that I could wait for me. As it turned out, the native menu was launched and began to be launched, I fell into a panic, I thought that I would have to bear the master and restore for the N'a sum. But fighting a little on the Internet and on the forum, I was able to restore FreestYledash (FSD). But this is all a lyrical retreat, we turn directly to the restoration!

Preparation for the firmware

Before starting the firmware, you must perform several actions for the preparation of the gadget. Perform all the steps described below.

Step 1 - Update Dashboard Dashboard.

- This is the second name "native" operating system of the console.

It doesn't matter what a drive version is used in Xbox, users can still update the Dashboard to obtain a new functionality and capabilities.

Dashboard update is free, and the process can be launched, if you go through the prefix to the official SUPPORT XBOX website.

Note that updating OS is optional, but it helps to get rid of possible errors and troubleshooting after installing the iXtreme.

  • Perform such actions:

Xbox 360 Winchester-Corona

Take a USB flash drive and format it on the computer by specifying that the file system must be FAT;

  • Fig.6 - Formatting the drive

2B3CFBBF33D18241230BE3C7A3FFDEC9.jpg.

  • Go to the site and download the latest version of the OS for your device;
  • Unpack the contents of the received archive to the USB drive; Disconnect your console.
  • Then plug the USB flash drive and re-run the device;

22F9EAA9DE948F7F09972D4F6E14B0BF.jpg.

When turned on, the Troubleshoot window will appear. In it, click on Offline System Update tile. Next, the system automatically recognizes the USB flash drive and starts upgrade.

After completing the action, the console will restart with the already new version of the Dashboard. All installed programs and games will be saved.

Step 2 - Preparing Tools Next step to install iXtreme

- This is the preparation of all the necessary tools that are needed for the physical modification of the console.

  • You will need:
  • SATA cable. We will use it for connecting the console with your computer;
  • To open the prefix housing, use a screwdriver, the TORX10 key or standard screwdriver (hour). Also, on the Internet you can purchase a special device Opening Tool for a simpler opening of the case;

47E51D7791446346920E1A837A2E6B32.jpg

Computer or laptop running Windows with the ability to connect the SATA cable.

Step 3 - Definition of Drive Version

If you do not know which version of the drive is installed in your console, you need to disassemble the device. On the actuator itself, its manufacturer specifies the exact name and model.

This information will be needed at the installation phase of the iXtreme.

Note that you need to fully remove the drive. It is enough to open the housing and find the top of the desired component, and then unscrew all of it with a screwdriver.

F134CF3802FFE128862A2650A95FDDD17.jpg.

Some examples of the appearance of the drives of different manufacturers:

Step 4 - Working with Computer

Remove the back cover of the computer and connect the SATA to an unused connector on the main board. The second side of the SATA should be connected to the attractable drive.

VGA video output cable should also be connected to XBOX so that the console continues its operation.

If you decide to use HDMI, then connect the console with a TV.

Make sure that the computer and the console are currently enabled and make sure that the devices are not turned off until the firmware is complete.

Step 5 - Installation PORT I / O 32

After connecting the console to the computer, run the device manager. Locate the Xbox components in the list.

78D314FFE095BDB79C1EBC3B1D3A8099.jpg

Right-click on the "Xbox 360" section and click on "update". In a new window, select the non-automatic update, but the search for updates manually.

Fig.11 - Windows Device Manager Window

Next, the system will prompt you to specify the directory from which you want to install the file.

Download the driver for the link, unzip the archive contents into a separate folder and in the task manager window, specify this directory as a source of installation of updates.

5A1AeDDF439459E293EB6DE66DE0DE1.jpg.

Windows can show a security message, skip it and continue installation. The new driver is only needed during the installation of the firmware for the console. At any time you can roll back all drivers on your PC and install official version of the developer.

Step 6 - Download Jungle Flasher and connect the drive

Download the computer and install the Jungle Flasher utility by reference.

In the archive you will find the EXE file of the program and the ixtreme firmware directory for all models of the drives.

After installing the utility, run it. In the main window, locate the MTK Flash 32 window.

F3AC356E149CD5DFB709AFC7934CB432.jpg

Click on the list field and select the model of your drive.

Fig.13 - Main window Jungle Flasher

When you press the drive settings key, DRIVE IN VENDOR MODE should be displayed.

41AE959EE6D87B9EEB6829DE2678E7F8.jpg.

This means that the drive is successfully connected to the computer and synchronized with the program.

Fig.14 - Successful Drive Connection If you have errors at this stage, we advise you to reconnect the device to your PC.

Often, problems appear if the Dashboard version has not been updated.

Step 7 Drive Key Process

  • Now the program needs to find out the drive authenticity. Perform such actions:
  • In the Jungle Flash window, go to the DVD Key tab;
  • Click on Io Port;
  • Select a drive;

eacaae5b8ded7ec10a27f9a8f52c1634.jpg

Click on the key

Fig.15 - Key reading The program will save the key in a separate directory. .

How to find out whether the drive

To determine more accurately flash xbox 360 or not, you need to get or independently record a disk with any game distributed in the image taken from the XGD3 disk. When trying to start such a carrier on the console with the official firmware, a message will be received that " This disk with mixed content " On the pirate firmware, the disk is started or issued an error " The disk is not supported ".

How to define FREEBOOT firmware

The presence or absence of FreeBoot can be recognized by a variety of features:

  • If you try to enable the console by pressing the opening button, it will appear on the screen xell menu (Blue screen with white inscriptions). If it is missing, the device is either pure or stitched by another method.
  • Starting speed The console may also indicate the presence of hacking. If the device works with FreeBoot, it can be loaded for a very long time compared to the "clean" consoles and the whole process will be accompanied by outsiders outgoing from Xbox.
  • If the logo with the inscription appears during loading Freestyle Dash - Gadget has on board FreeBoot.
  • GOD Games It is freely launched from external media connected via USB to the console.

To find out the version of the Xbox 360 firmware by the last method, using the GOD game launch, you must carefully carefully explore the described In the network, manuals for the correct entry of the game on USB media, pre-checking its performance. This will exclude extra misunderstandings. How to determine the version of the Xbox 360 firmware

It will be needed to further install the firmware iXtreme

XEXMENU -Furnished shell to run games with an extension * .xex with any media, has a built-in file manager, etc.

Download the image of XEXMENU, and write it using imgburn on a blank (I used a DVD-R blank). Download FSD and unpack on the USB flash drive ( The flash drive must be formatted in FAT32

).

Turn on xbox and insert our recorded blank to it, press the Xbox menu to start the display (if you recorded correctly, XEXMENU starts)

What to look like xexmenu We insert our USB flash drive with the FSD in the Xbox and the RB button on the joystick, open the flash drive tab in XexMenu, select the default.xex file, and we see our new FSD menu. But do not hurry to rejoice, not all!

A flash drive in no way to remove!

New menu (FSD)

The downloaded FSD archive is unpacking into the FSD or Freestyle folder on another flash drive and launch.ini, and specify in the launch.ini path to the Default.xex file and the plug-in to throw into the Plugin folder to the console disk, or in the FSD folder (Freestyle) swap.xex. I have xbox on 4 GB, and my way to the default.xex file is this: intmu: freestyledefault.xex, and to the plugin (to play multi-disc games) Such: Intmu: pluginsswap.xex

When you configured Launch.ini, we throw off our correcting Launch.ini to another flash drive and the FSD folder (Freestyle).

Insert in Xbox and already in the file manager (File Manager) of our new menu open this USB flash drive, and drop the FSD folder from it (Freestyle)

Further copy Launch.ini in the root of the directory, where you threw off the FSD folder (Freestyle).

We define the firmware XKEY.

XKey is a drive emulator, and is designed to launch ISO images of games from external media. For this he is required Additional device which is placed inside the console housing. So, if behind or on any other side (rarely), there is clearly not provided from the USB port, it means that the device is currently working with XKEY. FireBoot Firmware

6

 After everyone threw off, turn off your console, pull out the flash drives, and turn on. If everyone threw off correctly, she will launch FSD! Option for more experienced

Users  Pretty complicated , Option which not worth it enjoy  People n. which Once Dragging although would be its own . PC Required Disassemble , а Xbox360. then cantilevered drive unit к Connect . Computer Further will remain download relevant Option BY Definitions . After everyone threw off, turn off your console, pull out the flash drives, and turn on. If everyone threw off correctly, she will launch FSD! Firmware Enough , Not easy but Provides Maximum accurate intelligence Definitions .

DFFC038F28A750C1500A5FA8B79BB364.JPG.

about If a you which yet , decided what of methods for  you , Suitable which that will be Lish в look Completion this is Small , в video which Simple in words detail Describes  Methods, as discover Your Firmware on the Xbox .

Contact masters

If all of the above methods are too difficult, then to determine the firmware, it is recommended to avoid irreparable consequences to contact the service centers where the Xbox 360 firmware is engaged. If the console has been taken from hand and is able to contact the seller, ask him, maybe he remembers wherever carried out a breaking of the prefix.

Sometimes service centers are left on the Xbox case a sticker with their data and, often with the installation date and firmware version. However, this is not a guarantee, since it is impossible to be confident that the previous owner did not produce independent actions to update the hacking or that the prefix drive was not replaced.

Добавить комментарий